Order status View Order Status Checkout Checkout Email Email store
Search our store   
 

 

Precision Bits
 
Photo

Home » All Catagories

 Checkout

1/8" collet adapter
   
   
1/8" collet adapter

Details 

8th inch bit holder. Brass adapter. (.500" diameter shaft) Made By K2 CNC.
Used with your Porter Cable 892, 690, 7518 Router.
Will Not work with Porter Cable 7310 trimmer, Kress , and Bosch Colt Router.
See K2 site or call for 1/4 OD - 1/8th inch bit holder.
Application Hold small bits or endmill that normally can not be held by typical router collets.
Condition New - Brass
Min/Max Collet Size 1/32 to 1/4 inch
Shank (holding diameter on shaft) 0.50 inch
Material Brass
Warranty Returnable within 15 days.
Site www.K2cnctools.com

Collet

Collet
Shipping & Handling 0.1-1LBS:
Price: $19.95
1-8 Brass Collect Half
   
   
1-8 Brass Collect Half

Details 
1/8” bit holder made of brass with a .500" diameter shaft. Use with your Porter Cable 892, 690, 7518 Router with a .500 collet. Will Not work with Porter Cable 7310 trimmer, Kress , and Bosch Colt Router. Shipping is $3.50 to a USA address. International shipping are priced as an addition to the USA shipping fees.
Shipping & Handling 0.1-1LBS:
Price: $19.95
4' x 4' Travel CNC Router
   
   
4' x 4' Travel CNC Router

Details 
KG-5050-B 4x4 travel Ballscrew machine with .001 inch backlash.
5050 Controller Options: XYZ Axis Controller, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$2,650.00)
XYZ and A(indexor) Axis Controller Driver, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,100.00)
None
5050 Z Options: 5" Rigid Linear Rails w/Hi-Tolerance Ball Screws (.001 in backlash tolerance) Standard with machine
8" Rigid Linear Rails w/ Hi-Tolerance Ball Screws (.001 in backlash tolerance) (+$995.00)
12" Rigid Linear Rails w/ Hi-Tolerance Ball Screws (.001 in backlash tolerance) (+$1,395.00)
5050 Table Top Options: Aluminum T-Slotted (.500" thick) (+$1,095.00)
Vacuum table made of MDF, 3" and 2" Piping, 2 on/off Valves and Manifold (+$350.00)
None, I will make my own
Software_Control: Mach 3 (includes set up, settings, and basic and limited introduction from K2 via phone) (+$199.00)
None
KG Spindle Options: Porter Cable 892 - 2.25 HP (Recomended for economical) (+$220.00)
Porter Cable 7518 - 3.25 HP (+$350.00)
Precision Colombo 3HP, 18000 RPM, price includes machine upgrades (+$3,399.00)
Precision Colombo 3HP, 24,000 RPM, price includes machine upgrades (+$3,799.00)
Precision HSD 2.2HP, 18000 RPM, price includes machine upgrades (+$3,350.00)
Precision HSD 4HP, 18,000 RPM, price includes machine upgrades (Best Overall Choice) (+$3,499.00)
Precision HSD 4HP, 24000 RPM, price includes machine upgrades (+$3,700.00)
None
KG Spindle Mounts: PC 690-892 (3.5inches) router motor #8902 (+$45.95)
PC 7518 (4.2 inches) router motor #75182 (+$45.95)
Hitachi (3.27inches) (+$45.95)
Makita (3.22 inches) (+$45.95)
Bosch (3.5inches) (+$45.95)
Custom - Price is $150 plus - please call (+$200.00)
None-(Colombo and HSD spindles do not need a mount)
CAD_Software: Art Cam Pro - (CAD & CAM) We will refer you to a sales rep. (+$7,500.00)
Art Cam Insignia (+$3,500.00)
Rhino CAD (+$895.00)
KCDW - Price may vary - Estimate Only (+$10,000.00)
None
CAM Software: VisualMill Basic 5.0 (CAM) (+$925.00)
Rhino CAM Basic- (CAM) (+$925.00)
VisualMill Pro 5.0 (+$3,600.00)
Rhino CAM Pro (+$3,600.00)
None
5050-WTL: Welded steel legs (+$975.00)
None needed
5050-Shipping & Handling: USA (+$695.00)
Canada-Price subject to change by location and will be adjusted appropriately (+$895.00)
International Near Major Population (approx. $750.00 - $1200.00) Price subject to change by location and will be adjusted appropriately (+$999.00)
International Outside of Major Population (approx. $1100 - $2295.00) Price subject to change by location and will be adjusted appropriately (+$1,800.00)
None=-will pick up
Please bill me seperatly for actual shipping cost-Best choice for International orders
VacuumHoldDown: SAH 505, 11 KW, 370 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$6,295.00)
SAH 355, 7.5 KW, 240 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,895.00)
SAH 275, 4.0 KW, 220 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,495.00)
No vacuum, just Vacuum hold down G-code matrix for MDF and item list for with plumping. (+$100.00)
None
Shipping Disclaimer: All shipping quotes on the site are estimates only. Once the order is received we will get a actual price and make any neccessary corrections.
Price: $7,040.00
Please Call:
(714)-516-9199
5x10 machine travel
   
   
5x10 machine travel

Details 
5' x 10' CNC Router. Wood CNC machine.
12062 Controller Options: XYZ Axis Controller, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,125.00)
XYZ and A(indexor) Axis Controller Driver, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,575.00)
None
CAD_Software: Art Cam Pro - (CAD & CAM) We will refer you to a sales rep. (+$7,500.00)
Art Cam Insignia (+$3,500.00)
Rhino CAD (+$895.00)
KCDW - Price may vary - Estimate Only (+$10,000.00)
None
CAM Software: VisualMill Basic 5.0 (CAM) (+$925.00)
Rhino CAM Basic- (CAM) (+$925.00)
VisualMill Pro 5.0 (+$3,600.00)
Rhino CAM Pro (+$3,600.00)
None
Software_Control: Mach 3 (includes set up, settings, and basic and limited introduction from K2 via phone) (+$199.00)
None
12062 Controller Options: XYZ Axis Controller, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,125.00)
XYZ and A(indexor) Axis Controller Driver, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,575.00)
None
12062 Z Options: 5" Rigid Linear Rails w/Hi-Tolerance Ball Screws (.001 in backlash tolerance) Standard with machine (+$595.00)
8" Rigid Linear Rails w/ Hi-Tolerance Ball Screws (.001 in backlash tolerance) (+$1,590.00)
12" Rigid Linear Rails w/ Hi-Tolerance Ball Screws (.001 in backlash tolerance) (+$1,999.00)
12062 Table Top Options: Aluminum T-Slotted (.500" thick) (+$1,695.00)
Vacuum table made of MDF, 3" and 2" Piping, 4 on/off Valves and Manifold (+$495.00)
None, I will make my own
Software_Control: Mach 3 (includes set up, settings, and basic and limited introduction from K2 via phone) (+$199.00)
None
KG Spindle Options: Porter Cable 892 - 2.25 HP (Recomended for economical) (+$220.00)
Porter Cable 7518 - 3.25 HP (+$350.00)
Precision Colombo 3HP, 18000 RPM, price includes machine upgrades (+$3,399.00)
Precision Colombo 3HP, 24,000 RPM, price includes machine upgrades (+$3,799.00)
Precision HSD 2.2HP, 18000 RPM, price includes machine upgrades (+$3,350.00)
Precision HSD 4HP, 18,000 RPM, price includes machine upgrades (Best Overall Choice) (+$3,499.00)
Precision HSD 4HP, 24000 RPM, price includes machine upgrades (+$3,700.00)
None
VacuumHoldDown: SAH 505, 11 KW, 370 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$6,295.00)
SAH 355, 7.5 KW, 240 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,895.00)
SAH 275, 4.0 KW, 220 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,495.00)
No vacuum, just Vacuum hold down G-code matrix for MDF and item list for with plumping. (+$100.00)
None
Shipping Disclaimer: All shipping quotes on the site are estimates only. Once the order is received we will get a actual price and make any neccessary corrections.
Price: $9,290.00
Please Call:
(714)-516-9199
8th .25"
   
   
8th .25"

Details 
8th inch bit holder made of brass. (1 qty of .250" combo diameter shaft). Use with your Porter Cable 892, Porter Cable 690, Porter Cable 7310 trimmer, Kress, and Bosch Colt Router with .25 collet. Shipping is $3.50 to a USA address. International shipping are priced as an addition to the USA shipping fees.
Shipping & Handling 0.1-1LBS:
Price: $16.95
8th Combo .25" & .25"
   
   
8th Combo .25" & .25"

Details 
2 piece combo - 8th inch bit holder made of brass. (2 qty of .250" combo diameter shaft). Use with your Porter Cable 892, Porter Cable 690, Porter Cable 7310 trimmer, Kress, and Bosch Colt Router with .25 collet. Shipping is $3.50 to a USA address. International shipping are priced as an addition to the USA shipping fees.
Shipping & Handling 0.1-1LBS:
Price: $26.95
8th Combo .25" & .50"
   
   
8th Combo .25" & .50"

Details 
2 piece combo - 8th inch bit holder made of brass. (.500" and .250" combo diameter shaft). Use with your Porter Cable 892, Porter Cable 690, Porter Cable 7310 trimmer, Kress, and Bosch Colt Router with .25 collet. Shipping is $3.50 to a USA address. International shipping are priced as an addition to the USA shipping fees.
Shipping & Handling 0.1-1LBS:
Price: $26.95
8th Combo .5" & .5"
   
   
8th Combo .5" & .5"

Details 
2 piece combo - 8th inch bit holder made of brass (2 qty of .500" diameter shaft) Use with your Porter Cable 892, Porter Cable 690, Porter Cable 7310 trimmer, Kress, and Bosch Colt Router with .25 collet. Shipping is $3.50 to a USA address. International shipping are priced as an addition to the USA shipping fees.
Shipping & Handling 0.1-1LBS:
Price: $26.95
AWFS 4' x 4' Travel CNC Router
AWFS 4' x 4' Travel CNC Router AWFS 4' x 4' Travel CNC Router
AWFS 4' x 4' Travel CNC Router  
AWFS 4' x 4' Travel CNC Router

Details 
4 x 4
5050 Controller Options: XYZ Axis Controller, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$2,650.00)
XYZ and A(indexor) Axis Controller Driver, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,100.00)
None
5050 Table Top Options: Aluminum T-Slotted (.500" thick) (+$1,095.00)
Vacuum table made of MDF, 3" and 2" Piping, 2 on/off Valves and Manifold (+$350.00)
None, I will make my own
KG Spindle Mounts: PC 690-892 (3.5inches) router motor #8902 (+$45.95)
PC 7518 (4.2 inches) router motor #75182 (+$45.95)
Hitachi (3.27inches) (+$45.95)
Makita (3.22 inches) (+$45.95)
Bosch (3.5inches) (+$45.95)
Custom - Price is $150 plus - please call (+$200.00)
None-(Colombo and HSD spindles do not need a mount)
KG Spindle Options: Porter Cable 892 - 2.25 HP (Recomended for economical) (+$220.00)
Porter Cable 7518 - 3.25 HP (+$350.00)
Precision Colombo 3HP, 18000 RPM, price includes machine upgrades (+$3,399.00)
Precision Colombo 3HP, 24,000 RPM, price includes machine upgrades (+$3,799.00)
Precision HSD 2.2HP, 18000 RPM, price includes machine upgrades (+$3,350.00)
Precision HSD 4HP, 18,000 RPM, price includes machine upgrades (Best Overall Choice) (+$3,499.00)
Precision HSD 4HP, 24000 RPM, price includes machine upgrades (+$3,700.00)
None
CAD_Software: Art Cam Pro - (CAD & CAM) We will refer you to a sales rep. (+$7,500.00)
Art Cam Insignia (+$3,500.00)
Rhino CAD (+$895.00)
KCDW - Price may vary - Estimate Only (+$10,000.00)
None
CAM Software: VisualMill Basic 5.0 (CAM) (+$925.00)
Rhino CAM Basic- (CAM) (+$925.00)
VisualMill Pro 5.0 (+$3,600.00)
Rhino CAM Pro (+$3,600.00)
None
Software_Control: Mach 3 (includes set up, settings, and basic and limited introduction from K2 via phone) (+$199.00)
None
5050 Table Top Options: Aluminum T-Slotted (.500" thick) (+$1,095.00)
Vacuum table made of MDF, 3" and 2" Piping, 2 on/off Valves and Manifold (+$350.00)
None, I will make my own
5050-WTL: Welded steel legs (+$975.00)
None needed
VacuumHoldDown: SAH 505, 11 KW, 370 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$6,295.00)
SAH 355, 7.5 KW, 240 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,895.00)
SAH 275, 4.0 KW, 220 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,495.00)
No vacuum, just Vacuum hold down G-code matrix for MDF and item list for with plumping. (+$100.00)
None
3925-Shipping & Handling: USA (+$295.00)
Canada-Price subject to change by location and will be adjusted appropriately (+$350.00)
International Near Major Population (approx. $550.00 - $595.00) Price subject to change by location and will be adjusted appropriately (+$550.00)
International Outside of Major Population (approx. $595.00 - $1295.00) Price subject to change by location and will be adjusted appropriately (+$1,295.00)
None=-will pick up
Please bill me seperatly for actual shipping cost-Best choice for International orders
Shipping Disclaimer: All shipping quotes on the site are estimates only. Once the order is received we will get a actual price and make any neccessary corrections.
Price: $5,999.00
Please Call:
(714)-516-9199
AWFS 4' x 8' Travel CNC Router
AWFS 4' x 8' Travel CNC Router AWFS 4' x 8' Travel CNC Router
   
AWFS 4' x 8' Travel CNC Router

Details 
4 x 8 Feet Cutting area.
9850 Controller Options: XYZ Axis Controller, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$2,900.00)
XYZ and A(indexor) Axis Controller Driver, 4 Servo Motors, Power cord, E-stop, Home Switches, Cable Carriers. (+$3,350.00)
None
9850 Table Top Options: Aluminum T-Slotted (.500" thick) (+$1,495.00)
Vacuum table made of MDF, 3 and 2" Piping, 4 Valvesand Manifold (+$395.00)
None, I will make my own
KG Spindle Mounts: PC 690-892 (3.5inches) router motor #8902 (+$45.95)
PC 7518 (4.2 inches) router motor #75182 (+$45.95)
Hitachi (3.27inches) (+$45.95)
Makita (3.22 inches) (+$45.95)
Bosch (3.5inches) (+$45.95)
Custom - Price is $150 plus - please call (+$200.00)
None-(Colombo and HSD spindles do not need a mount)
KG Spindle Options: Porter Cable 892 - 2.25 HP (Recomended for economical) (+$220.00)
Porter Cable 7518 - 3.25 HP (+$350.00)
Precision Colombo 3HP, 18000 RPM, price includes machine upgrades (+$3,399.00)
Precision Colombo 3HP, 24,000 RPM, price includes machine upgrades (+$3,799.00)
Precision HSD 2.2HP, 18000 RPM, price includes machine upgrades (+$3,350.00)
Precision HSD 4HP, 18,000 RPM, price includes machine upgrades (Best Overall Choice) (+$3,499.00)
Precision HSD 4HP, 24000 RPM, price includes machine upgrades (+$3,700.00)
None
CAD_Software: Art Cam Pro - (CAD & CAM) We will refer you to a sales rep. (+$7,500.00)
Art Cam Insignia (+$3,500.00)
Rhino CAD (+$895.00)
KCDW - Price may vary - Estimate Only (+$10,000.00)
None
CAM Software: VisualMill Basic 5.0 (CAM) (+$925.00)
Rhino CAM Basic- (CAM) (+$925.00)
VisualMill Pro 5.0 (+$3,600.00)
Rhino CAM Pro (+$3,600.00)
None
Software_Control: Mach 3 (includes set up, settings, and basic and limited introduction from K2 via phone) (+$199.00)
None
5050-WTL: Welded steel legs (+$975.00)
None needed
VacuumHoldDown: SAH 505, 11 KW, 370 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$6,295.00)
SAH 355, 7.5 KW, 240 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,895.00)
SAH 275, 4.0 KW, 220 cfm, filter, releif valve, plumping of 3" & 2" pipes with on/off valve. Comes with shipping (+$5,495.00)
No vacuum, just Vacuum hold down G-code matrix for MDF and item list for with plumping. (+$100.00)
None
9850-Shipping & Handling: USA (+$995.00)
Canada-Price subject to change by location and will be adjusted appropriately (+$1,195.00)
International Near Major Population (approx. $999 - $1700.00) Price subject to change by location and will be adjusted appropriately (+$1,600.00)
International Outside of Major Population (approx. $1700 - $2295.00) Price subject to change by location and will be adjusted appropriately (+$1,999.00)
None=-will pick up
Please bill me seperatly for actual shipping cost-Best choice for International orders
Shipping Disclaimer: All shipping quotes on the site are estimates only. Once the order is received we will get a actual price and make any neccessary corrections.
Price: $8,595.00
Please Call:
(714)-516-9199
Clamps (Aluminum)
   
   
Clamps (Aluminum)

Details 
4 Adjustable Aluminum Clamps. complete with knobs and 1/4 20 bolts
Price: $60.00
CNC Aluminum Solid Carbide Router Bits
CNC Aluminum Solid Carbide Router Bits CNC Aluminum Solid Carbide Router Bits
   
CNC Aluminum Solid Carbide Router Bits

Details 
CNC Aluminum Solid Carbide Spiral 'O' Flute Router Bits Designed for routing Aluminum, Brass, Copper and Non-ferrous Metals
CNC Aluminum Solid Carbide Router Bits: 51406- Upcut- D-1/8, B-5/16, d-1/8, L-1 1/2
51408- Upcut- D-3/16, B-1/2, d-1/4, L-2 (+$14.70)
51402- Upcut- D-1/4, B-5/8, d-1/4, L-2 (+$13.02)
51506- Downcut- D-1/8, B-5/16, d-1/8, L-1 1/2
51508- Downcut-D-3/16, B-1/2, d-1/4, L-2 (+$14.70)
51502- Downcut-D-1/4, B-5/8, d-1/4, L-2 (+$13.02)
Price: $33.60
Please Call:
(714)-516-9199
CNC Compression 2 Flute Solid Carbide Spiral Bits for MDF/Laminate
CNC Compression 2 Flute Solid Carbide Spiral Bits for MDF/Laminate CNC Compression 2 Flute Solid Carbide Spiral Bits for MDF/Laminate
   
CNC Compression 2 Flute Solid Carbide Spiral Bits for MDF/Laminate

Details 
Designed for high feed rates and a clean finish.
AT-CNCW3: 46170
46172 (+$65.40)
46174 (+$48.40)
46178 (+$52.85)
46182 (+$57.55)
46186 (+$62.20)
46188 (+$39.75)
46189 (+$63.80)
46190 (+$63.20)
46194 (+$178.40)
46198 (+$225.80)
Price: $53.20
Please Call:
(714)-516-9199
CNC Compression Single Flute Solid Carbide Spiral Bits for MDF
CNC Compression Single Flute Solid Carbide Spiral Bits for MDF  
   
CNC Compression Single Flute Solid Carbide Spiral Bits for MDF

Details 
Designed for high feed rates and a clean finish
AT-CNCW4: 46140
46142 (+$35.00)
46144 (+$39.40)
46148 (+$43.80)
46150 (+$52.85)
46152 (+$57.10)
46156 (+$59.30)
46159 (+$54.05)
46160 (+$66.50)
46164 (+$184.40)
46168 (+$230.35)
Price: $48.60
Please Call:
(714)-516-9199
CNC Spiral 2 Flute Plunge Solid Cardide Router Bit
CNC Spiral 2 Flute Plunge Solid Cardide Router Bit  
   
CNC Spiral 2 Flute Plunge Solid Cardide Router Bit

Details 
Designed for production settings and are excellent for creating grooves and dado cuts
AT-CNCW1: 46100
46310 (+$6.35)
46101
46314
46102
46316 (+$12.15)
46115 (+$17.75)
46119 (+$50.30)
46317 (+$16.10)
46117 (+$55.00)
46318 (+$52.30)
46319 (+$49.70)
46103 (+$12.05)
46320 (+$23.85)
46104 (+$48.55)
AT-CNCW1A: 46105 (+$53.65)
46106 (+$52.70)
46107 (+$60.85)
46108 (+$171.20)
46121 (+$206.90)
46109 (+$184.60)
Price: $25.60
Please Call:
(714)-516-9199
CNC Spiral Flute Plunge Solid Carbide for Solid Wood
CNC Spiral Flute Plunge Solid Carbide for Solid Wood  
   
CNC Spiral Flute Plunge Solid Carbide for Solid Wood

Details 
Designed for speed and finish when working with solid hard woods. 2
AT-CNCW2: 46241
46243 (+$9.00)
46245 (+$0.45)
46247 (+$9.00)
46248 (-$0.60)
46250 (+$15.25)
46251 (+$17.55)
46253 (+$58.30)
46255 (+$15.25)
46257 (+$55.75)
46259 (+$27.85)
46261 (+$60.90)
46263 (+$69.45)
Price: $25.30
Please Call:
(714)-516-9199
CON-SERVO4
   
   
CON-SERVO4

Details 
4 Servo Motor Controller with feedback 1000 line US made encoders.
List Price: $1,625.00
Price: $1,625.00
CON-STEP4
   
   
CON-STEP4

Details 
4 axis stepper controller and 4 stepper motors
List Price: $1,200.00
Price: $1,200.00
DC_SERVO_91C (Large)
DC_SERVO_91C (Large) DC_SERVO_91C (Large)
DC_SERVO_91C (Large) DC_SERVO_91C (Large)
DC_SERVO_91C (Large)

Details 
K2-D91C
+ Servo Motor
+ DC Servo motor:
+ Fits some models of KG-9850, KG-10260
+ Motor Model D91C-30B7-TC13
+ 120W,
+ 24VDC
+ Max RPM=3000,
+ current=8.5A.
+ Includes a US digital encoder. E5S-250-250
+ PLEASE CALL TO PURCHASE
List Price: $265.00
Price: $145.00
DC_SERVO_D625 (Small)
   
   
DC_SERVO_D625 (Small)

Details 
K2-D625
+ Servo Motor
+ DC Servo motor:
+ 25W,
+ Fits KT-1414, KT-2514 Servo Machines
+ Motor Model D625-30B7-TC10
+ 24VDC
+ Max RPM=3000,
+ current=1.5A.
+ Includes a US digital encoder. E5S-250-250
List Price: $225.00
Price: $100.00

« Previous | 1 | 2 | 3 | Next »
Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

News
Some news can go here and maybe a picture or two. Some news can go here and maybe a picture or two. Some news can go here and maybe a picture or two. Some news can go here and maybe a picture or two. Some news can go here and maybe a picture or two. Some news can go here and maybe a picture or two.

K2CNCTOOLS.COM
1643 W. Orange Grove Ave
Orange, CA 92868
Phone: 1-(714)-516-1999

© Copyright 2007-2010
K2CNC - USA
  home | about us | products | affiliates | search | view cart | contact us | Static Pages